# pulse2percept.models¶

Computational models of the retina, such as phosphene and neural response models.

class pulse2percept.models.AxonMapModel(**params)[source]

Axon map model of [Beyeler2019] (standalone model)

Implements the axon map model described in [Beyeler2019], where percepts are elongated along nerve fiber bundle trajectories of the retina.

Parameters: axlambda (double, optional) – Exponential decay constant along the axon(microns). rho (double, optional) – Exponential decay constant away from the axon(microns). eye ({'RE', LE'}, optional) – Eye for which to generate the axon map. xrange ((x_min, x_max), optional) – A tuple indicating the range of x values to simulate (in degrees of visual angle). In a right eye, negative x values correspond to the temporal retina, and positive x values to the nasal retina. In a left eye, the opposite is true. yrange (tuple, (y_min, y_max)) – A tuple indicating the range of y values to simulate (in degrees of visual angle). Negative y values correspond to the superior retina, and positive y values to the inferior retina. xystep (int, double, tuple) – Step size for the range of (x,y) values to simulate (in degrees of visual angle). For example, to create a grid with x values [0, 0.5, 1] use x_range=(0, 1) and xystep=0.5. grid_type ({'rectangular', 'hexagonal'}) – Whether to simulate points on a rectangular or hexagonal grid loc_od (loc_od,) – Location of the optic disc in degrees of visual angle. Note that the optic disc in a left eye will be corrected to have a negative x coordinate. n_axons (int, optional) – Number of axons to generate. axons_range ((min, max), optional) – The range of angles(in degrees) at which axons exit the optic disc. This corresponds to the range of $phi_0$ values used in [Jansonius2009]. n_ax_segments (int, optional) – Number of segments an axon is made of. ax_segments_range ((min, max), optional) – Lower and upper bounds for the radial position values(polar coords) for each axon. min_ax_sensitivity (float, optional) – Axon segments whose contribution to brightness is smaller than this value will be pruned to improve computational efficiency. Set to a value between 0 and 1. axon_pickle (str, optional) – File name in which to store precomputed axon maps. ignore_pickle (bool, optional) – A flag whether to ignore the pickle file in future calls to model.build().

Notes

• The axon map is not very accurate when the upper bound of ax_segments_range is greater than 90 deg.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val) self
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
has_space

Returns True if the model has a spatial component

has_time

Returns True if the model has a temporal component

is_built

Returns True if the build model has been called

predict_percept(implant, t_percept=None)[source]

Predict a percept

Important

You must call build before calling predict_percept.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
set_params(params)[source]

Set model parameters

This is a convenience function to set parameters that might be part of the spatial model, the temporal model, or both.

Alternatively, you can set the parameter directly, e.g. model.spatial.verbose = True.

Note

If a parameter exists in both spatial and temporal models(e.g., verbose), both models will be updated.

Parameters: params (dict) – A dictionary of parameters to set.
class pulse2percept.models.AxonMapSpatial(**params)[source]

Axon map model of [Beyeler2019] (spatial module only)

Implements the axon map model described in [Beyeler2019], where percepts are elongated along nerve fiber bundle trajectories of the retina.

Parameters: axlambda (double, optional) – Exponential decay constant along the axon(microns). rho (double, optional) – Exponential decay constant away from the axon(microns). eye ({'RE', LE'}, optional) – Eye for which to generate the axon map. xrange ((x_min, x_max), optional) – A tuple indicating the range of x values to simulate (in degrees of visual angle). In a right eye, negative x values correspond to the temporal retina, and positive x values to the nasal retina. In a left eye, the opposite is true. yrange (tuple, (y_min, y_max)) – A tuple indicating the range of y values to simulate (in degrees of visual angle). Negative y values correspond to the superior retina, and positive y values to the inferior retina. xystep (int, double, tuple) – Step size for the range of (x,y) values to simulate (in degrees of visual angle). For example, to create a grid with x values [0, 0.5, 1] use x_range=(0, 1) and xystep=0.5. grid_type ({'rectangular', 'hexagonal'}) – Whether to simulate points on a rectangular or hexagonal grid loc_od (loc_od,) – Location of the optic disc in degrees of visual angle. Note that the optic disc in a left eye will be corrected to have a negative x coordinate. n_axons (int, optional) – Number of axons to generate. axons_range ((min, max), optional) – The range of angles(in degrees) at which axons exit the optic disc. This corresponds to the range of $phi_0$ values used in [Jansonius2009]. n_ax_segments (int, optional) – Number of segments an axon is made of. ax_segments_range ((min, max), optional) – Lower and upper bounds for the radial position values(polar coords) for each axon. min_ax_sensitivity (float, optional) – Axon segments whose contribution to brightness is smaller than this value will be pruned to improve computational efficiency. Set to a value between 0 and 1. axon_pickle (str, optional) – File name in which to store precomputed axon maps. ignore_pickle (bool, optional) – A flag whether to ignore the pickle file in future calls to model.build().

Notes

• The axon map is not very accurate when the upper bound of ax_segments_range is greater than 90 deg.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
calc_axon_sensitivity(bundles)[source]

Calculate the sensitivity of each axon segment to electrical current

This function combines the x,y coordinates of each bundle segment with a sensitivity value that depends on the distance of the segment to the cell body and self.axlambda.

The number of bundles must equal the number of points on self.grid. The function will then assume that the i-th bundle passes through the i-th point on the grid. This is used to determine the bundle segment that is closest to the i-th point on the grid, and to cut off all segments that extend beyond the soma. This effectively transforms a bundle into an axon, where the first axon segment now corresponds with the i-th location of the grid.

After that, each axon segment gets a sensitivity value that depends on the distance of the segment to the soma (with decay rate self.axlambda). This is typically done during the build process, so that the only work left to do during run time is to multiply the sensitivity value with the current applied to each segment.

Parameters: bundles (list of Nx2 arrays) – A list of bundles, where every bundle is an Nx2 array consisting of the x,y coordinates of each axon segment (retinal coords, microns). Note that each bundle will most likely have a different N axon_contrib (list of Nx3 arrays) – A list of axon segments and sensitivity values. Each entry in the list is a Nx3 array, where the first two columns contain the retinal coordinates of each axon segment (microns), and the third column contains the sensitivity of the segment to electrical current. The latter depends on self.axlambda.
calc_bundle_tangent(xc, yc)[source]

Calculates orientation of fiber bundle tangent at (xc, yc)

Parameters: yc (xc,) – (x, y) retinal location of point at which to calculate bundle orientation in microns. tangent (scalar) – An angle in radians
static dva2ret(xdva)[source]

Convert degrees of visual angle (dva) into retinal coords (um)

The axon map model converts degrees of visual angle into a retinal distance from the optic axis (um) using Eq. A5 in [Watson2014].

find_closest_axon(bundles, xret=None, yret=None, return_index=False)[source]

Finds the closest axon segment for a point on the retina

This function will search a number of nerve fiber bundles (bundles) and return the bundle that is closest to a particular point (or list of points) on the retinal surface (xret, yret).

Parameters: bundles (list of Nx2 arrays) – A list of bundles, where every bundle is an Nx2 array consisting of the x,y coordinates of each axon segment (retinal coords, microns). Note that each bundle will most likely have a different N yret (xret,) – The x,y location on the retina (in microns, where the fovea is the origin) for which to find the closests axon. return_index (bool, optional) – If True, the function will also return the index into bundles that represents the closest axon axon (Nx2 array or list of Nx2 arrays) – For each point in (xret, yret), returns an Nx2 array that represents the closest axon to that point. Each row in the array contains the x,y retinal coordinates (microns) of a particular axon segment. idx_axon (scalar or list of scalars, optional) – If return_index is True, also returns the index in bundles of the closest axon (or list of closest axons).
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

grow_axon_bundles(n_bundles=None, prune=True)[source]

Grow a number of axon bundles

This method generates the trajectory of a number of nerve fiber bundles based on the mathematical model described in [Beyeler2019], which is based on [Jansonius2009].

Bundles originate at the optic nerve head with initial angle phi0. The method generates n_bundles axon bundles whose phi0 values are linearly sampled from self.axons_range (polar coords). Each axon will consist of self.n_ax_segments segments that span self.ax_segments_range distance from the optic nerve head (polar coords).

Parameters: n_bundles (int, optional) – Number of axon bundles to generate. If None, self.n_axons is used prune (bool, optional) – If set to True, will remove axon segments that are outside the simulated area self.xrange, self.yrange for the sake of computational efficiency. bundles (list of Nx2 arrays) – A list of bundles, where every bundle is an Nx2 array consisting of the x,y coordinates of each axon segment (retinal coords, microns). Note that each bundle will most likely have a different N
is_built

A flag indicating whether the model has been built

plot(use_dva=False, annotate=True, autoscale=True, ax=None)[source]

Plot the axon map

Parameters: use_dva (bool, optional) – Uses degrees of visual angle (dva) if True, else retinal coordinates (microns) annotate (bool, optional) – Flag whether to label the four retinal quadrants autoscale (bool, optional) – Whether to adjust the x,y limits of the plot ax (matplotlib.axes._subplots.AxesSubplot, optional) – A Matplotlib axes object. If None, will either use the current axes (if exists) or create a new Axes object
predict_percept(implant, t_percept=None)[source]

Predict the spatial response

Important

Don’t override this method if you are creating your own model. Customize _predict_spatial instead.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
static ret2dva(xret)[source]

Convert retinal corods (um) to degrees of visual angle (dva)

The axon map model converts an eccentricity measurement on the retinal surface(in micrometers), measured from the optic axis, into degrees of visual angle using Eq. A6 in [Watson2014].

set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.BaseModel(**params)[source]

Abstract base class for all models

Provides the following functionality:

• Pretty-print class attributes (via _pprint_params and PrettyPrint)
• Build a model (via build) and flip the is_built switch
• User-settable parameters must be listed in get_default_params
• New class attributes can only be added in the constructor (enforced via Frozen and FreezeError).
build(**build_params)[source]

Build the model

Every model must have a build method, which is meant to perform all expensive one-time calculations. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
get_default_params()[source]

Return a dict of user-settable model parameters

is_built

A flag indicating whether the model has been built

set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.FadingTemporal(**params)[source]

A generic temporal model for phosphene fading

Implements phosphene fading using a leaky integrator:

$\frac{dB}{dt} = -\frac{A+B}{\tau}$

where $$A$$ is the stimulus amplitude, $$B$$ is the perceived brightness, and $$\tau$$ is the exponential decay constant (tau).

The model makes the following assumptions:

• Cathodic currents (negative amplitudes) will increase perceived brightness
• Anodic currents (positive amplitudes) will decrease brightness
• Brightness is bounded in $$[\theta, \infinity[$$, where $$\theta$$ (thresh_percept) is a nonnegative scalar
Parameters: dt (float, optional) – Sampling time step of the simulation (ms) tau (float, optional) – Time decay constant for the exponential decay (ms). Larger values lead to slower decay. Brightness should decay to half its peak (“half-life”) after $$\ln(2) \tau$$ milliseconds. thresh_percept (float, optional) – Below threshold, the percept has brightness zero. versionadded (.) –
build(**build_params)[source]

Build the model

Every model must have a build method, which is meant to perform all expensive one-time calculations. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
find_threshold(stim, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: stim (Stimulus) – The stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

is_built

A flag indicating whether the model has been built

predict_percept(stim, t_percept=None)[source]

Predict the temporal response

Important

Don’t override this method if you are creating your own model. Customize _predict_temporal instead.

Parameters: stim (: py: class: ~pulse2percept.stimuli.Stimulus or) – : py: class: ~pulse2percept.models.Percept Either a Stimulus or a Percept object. The temporal model will be applied to each spatial location in the stimulus/percept. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, the percept will be output once very 20 ms (50 Hz frame rate). Note If your stimulus is shorter than 20 ms, you should specify the desired time points manually. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if stim is None.

Notes

• If a list of time points is provided for t_percept, the values will automatically be sorted.
set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.Horsager2009Model(**params)[source]

[Horsager2009] Standalone model

Implements the temporal response model described in [Horsager2009], which assumes that the temporal activation of retinal tissue is the output of a linear-nonlinear model cascade (see Fig.2 in the paper).

Note

Use this class if you want a standalone model. Use Horsager2009Temporal if you want to combine the temporal model with a spatial model.

Parameters: dt (float, optional) – Sampling time step (ms) tau1 (float, optional) – Time decay constant for the fast leaky integrater. tau2 (float, optional) – Time decay constant for the charge accumulation. tau3 (float, optional) – Time decay constant for the slow leaky integrator. eps (float, optional) – Scaling factor applied to charge accumulation. Common values at threshold: 0.00225, suprathreshold: 0.00873. Power nonlinearity (exponent of the half-wave rectification). Common values at threshold: 3.43, suprathreshold: 0.83. thresh_percept (float, optional) – Below threshold, the percept has brightness zero.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val) self
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
has_space

Returns True if the model has a spatial component

has_time

Returns True if the model has a temporal component

is_built

Returns True if the build model has been called

predict_percept(implant, t_percept=None)[source]

Predict a percept

Important

You must call build before calling predict_percept.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
set_params(params)[source]

Set model parameters

This is a convenience function to set parameters that might be part of the spatial model, the temporal model, or both.

Alternatively, you can set the parameter directly, e.g. model.spatial.verbose = True.

Note

If a parameter exists in both spatial and temporal models(e.g., verbose), both models will be updated.

Parameters: params (dict) – A dictionary of parameters to set.
class pulse2percept.models.Horsager2009Temporal(**params)[source]

Temporal model of [Horsager2009]

Implements the temporal response model described in [Horsager2009], which assumes that the temporal activation of retinal tissue is the output of a linear-nonlinear model cascade (see Fig.2 in the paper).

Note

Use this class if you want to combine the temporal model with a spatial model. Use Horsager2009Model if you want a a standalone model.

Parameters: dt (float, optional) – Sampling time step (ms) tau1 (float, optional) – Time decay constant for the fast leaky integrater. tau2 (float, optional) – Time decay constant for the charge accumulation. tau3 (float, optional) – Time decay constant for the slow leaky integrator. eps (float, optional) – Scaling factor applied to charge accumulation. Common values at threshold: 2.25, suprathreshold: 8.73. beta (float, optional) – Power nonlinearity (exponent of the half-wave rectification). Common values at threshold: 3.43, suprathreshold: 0.83. thresh_percept (float, optional) – Below threshold, the percept has brightness zero.
build(**build_params)[source]

Build the model

Every model must have a build method, which is meant to perform all expensive one-time calculations. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
find_threshold(stim, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: stim (Stimulus) – The stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

is_built

A flag indicating whether the model has been built

predict_percept(stim, t_percept=None)[source]

Predict the temporal response

Important

Don’t override this method if you are creating your own model. Customize _predict_temporal instead.

Parameters: stim (: py: class: ~pulse2percept.stimuli.Stimulus or) – : py: class: ~pulse2percept.models.Percept Either a Stimulus or a Percept object. The temporal model will be applied to each spatial location in the stimulus/percept. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, the percept will be output once very 20 ms (50 Hz frame rate). Note If your stimulus is shorter than 20 ms, you should specify the desired time points manually. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if stim is None.

Notes

• If a list of time points is provided for t_percept, the values will automatically be sorted.
set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.Model(spatial=None, temporal=None, **params)[source]

Computational model

To build your own model, you can mix and match spatial and temporal models at will.

For example, to create a model that combines the scoreboard model described in [Beyeler2019] with the temporal model cascade described in [Nanduri2012], use the following:

model = Model(spatial=ScoreboardSpatial(),
temporal=Nanduri2012Temporal())


New in version 0.6.

Parameters: spatial (SpatialModel or None) – blah temporal (TemporalModel or None) – blah **params – Additional keyword arguments(e.g., verbose=True) to be passed to either the spatial model, the temporal model, or both.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val) self
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
has_space

Returns True if the model has a spatial component

has_time

Returns True if the model has a temporal component

is_built

Returns True if the build model has been called

predict_percept(implant, t_percept=None)[source]

Predict a percept

Important

You must call build before calling predict_percept.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
set_params(params)[source]

Set model parameters

This is a convenience function to set parameters that might be part of the spatial model, the temporal model, or both.

Alternatively, you can set the parameter directly, e.g. model.spatial.verbose = True.

Note

If a parameter exists in both spatial and temporal models(e.g., verbose), both models will be updated.

Parameters: params (dict) – A dictionary of parameters to set.
class pulse2percept.models.Nanduri2012Model(**params)[source]

[Nanduri2012] Model

Implements the model described in [Nanduri2012], where percepts are circular and their brightness evolves over time.

The model combines two parts:

• Nanduri2012Spatial is used to calculate the spatial activation function, which is assumed to be equivalent to the “current spread” described as a function of distance from the center of the stimulating electrode (see Eq.2 in the paper).
• Nanduri2012Temporal is used to calculate the temporal activation function, which is assumed to be the output of a linear-nonlinear cascade model (see Fig.6 in the paper).
Parameters: atten_a (float, optional) – Nominator of the attentuation function (Eq.2 in the paper) atten_n (float32, optional) – Exponent of the attenuation function’s denominator (Eq.2 in the paper) dt (float, optional) – Sampling time step (ms) tau1 (float, optional) – Time decay constant for the fast leaky integrater. tau2 (float, optional) – Time decay constant for the charge accumulation. tau3 (float, optional) – Time decay constant for the slow leaky integrator. eps (float, optional) – Scaling factor applied to charge accumulation. asymptote (float, optional) – Asymptote of the logistic function used in the stationary nonlinearity stage. slope (float, optional) – Slope of the logistic function in the stationary nonlinearity stage. shift (float, optional) – Shift of the logistic function in the stationary nonlinearity stage. scale_out (float32, optional) – A scaling factor applied to the output of the model thresh_percept (float, optional) – Below threshold, the percept has brightness zero.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val) self
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
has_space

Returns True if the model has a spatial component

has_time

Returns True if the model has a temporal component

is_built

Returns True if the build model has been called

predict_percept(implant, t_percept=None)[source]

Predict a percept

Important

You must call build before calling predict_percept.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
set_params(params)[source]

Set model parameters

This is a convenience function to set parameters that might be part of the spatial model, the temporal model, or both.

Alternatively, you can set the parameter directly, e.g. model.spatial.verbose = True.

Note

If a parameter exists in both spatial and temporal models(e.g., verbose), both models will be updated.

Parameters: params (dict) – A dictionary of parameters to set.
class pulse2percept.models.Nanduri2012Spatial(**params)[source]

Spatial response model of [Nanduri2012]

Implements the spatial response model described in [Nanduri2012], which assumes that the spatial activation of retinal tissue is equivalent to the “current spread” $$I$$, described as a function of distance $$r$$ from the center of the stimulating electrode:

$\begin{split}I(r) = \begin{cases} \frac{\verb!atten_a!}{\verb!atten_a! + (r-a)^\verb!atten_n!} & r > a \\ 1 & r \leq a \end{cases}\end{split}$

where $$a$$ is the radius of the electrode (see Eq.2 in the paper).

Note

Use this class if you just want the spatial response model. Use Nanduri2012Model if you want both the spatial and temporal model.

Parameters: atten_a (float, optional) – Nominator of the attentuation function atten_n (float32, optional) – Exponent of the attenuation function’s denominator
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
dva2ret(xdva)[source]

Convert degrees of visual angle (dva) to retinal eccentricity (um)

Assumes that one degree of visual angle is equal to 280 um on the retina.

find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Returns all settable parameters of the Nanduri model

is_built

A flag indicating whether the model has been built

plot(use_dva=False, autoscale=True, ax=None)[source]

Plot the model

Parameters: use_dva (bool, optional) – Uses degrees of visual angle (dva) if True, else retinal coordinates (microns) autoscale (bool, optional) – Whether to adjust the x,y limits of the plot to fit the implant ax (matplotlib.axes._subplots.AxesSubplot, optional) – A Matplotlib axes object. If None, will either use the current axes (if exists) or create a new Axes object. ax (matplotlib.axes.Axes) – Returns the axis object of the plot
predict_percept(implant, t_percept=None)[source]

Predict the spatial response

Important

Don’t override this method if you are creating your own model. Customize _predict_spatial instead.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
ret2dva(xret)[source]

Convert retinal eccentricity (um) to degrees of visual angle (dva)

Assumes that one degree of visual angle is equal to 280 um on the retina.

set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.Nanduri2012Temporal(**params)[source]

Temporal model of [Nanduri2012]

Implements the temporal response model described in [Nanduri2012], which assumes that the temporal activation of retinal tissue is the output of a linear-nonlinear model cascade (see Fig.6 in the paper).

Note

Use this class if you just want the temporal response model. Use Nanduri2012Model if you want both the spatial and temporal model.

Parameters: dt (float, optional) – Sampling time step (ms) tau1 (float, optional) – Time decay constant for the fast leaky integrater. tau2 (float, optional) – Time decay constant for the charge accumulation. tau3 (float, optional) – Time decay constant for the slow leaky integrator. eps (float, optional) – Scaling factor applied to charge accumulation. asymptote (float, optional) – Asymptote of the logistic function used in the stationary nonlinearity stage. slope (float, optional) – Slope of the logistic function in the stationary nonlinearity stage. shift (float, optional) – Shift of the logistic function in the stationary nonlinearity stage. scale_out (float32, optional) – A scaling factor applied to the output of the model thresh_percept (float, optional) – Below threshold, the percept has brightness zero.
build(**build_params)[source]

Build the model

Every model must have a build method, which is meant to perform all expensive one-time calculations. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
find_threshold(stim, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: stim (Stimulus) – The stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

is_built

A flag indicating whether the model has been built

predict_percept(stim, t_percept=None)[source]

Predict the temporal response

Important

Don’t override this method if you are creating your own model. Customize _predict_temporal instead.

Parameters: stim (: py: class: ~pulse2percept.stimuli.Stimulus or) – : py: class: ~pulse2percept.models.Percept Either a Stimulus or a Percept object. The temporal model will be applied to each spatial location in the stimulus/percept. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, the percept will be output once very 20 ms (50 Hz frame rate). Note If your stimulus is shorter than 20 ms, you should specify the desired time points manually. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if stim is None.

Notes

• If a list of time points is provided for t_percept, the values will automatically be sorted.
set_params(**params)[source]

Set the parameters of this model

exception pulse2percept.models.NotBuiltError[source]

Exception class used to raise if model is used before building

This class inherits from both ValueError and AttributeError to help with exception handling and backward compatibility.

with_traceback()

Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.

class pulse2percept.models.ScoreboardModel(**params)[source]

Scoreboard model of [Beyeler2019] (standalone model)

Implements the scoreboard model described in [Beyeler2019], where all percepts are Gaussian blobs.

Note

Use this class if you want a standalone model. Use ScoreboardSpatial if you want to combine the spatial model with a temporal model.

Parameters: rho (double, optional) – Exponential decay constant describing phosphene size (microns). x_range ((x_min, x_max), optional) – A tuple indicating the range of x values to simulate (in degrees of visual angle). In a right eye, negative x values correspond to the temporal retina, and positive x values to the nasal retina. In a left eye, the opposite is true. y_range (tuple, (y_min, y_max)) – A tuple indicating the range of y values to simulate (in degrees of visual angle). Negative y values correspond to the superior retina, and positive y values to the inferior retina. xystep (int, double, tuple) – Step size for the range of (x,y) values to simulate (in degrees of visual angle). For example, to create a grid with x values [0, 0.5, 1] use x_range=(0, 1) and xystep=0.5. grid_type ({'rectangular', 'hexagonal'}) – Whether to simulate points on a rectangular or hexagonal grid
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val) self
find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
has_space

Returns True if the model has a spatial component

has_time

Returns True if the model has a temporal component

is_built

Returns True if the build model has been called

predict_percept(implant, t_percept=None)[source]

Predict a percept

Important

You must call build before calling predict_percept.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
set_params(params)[source]

Set model parameters

This is a convenience function to set parameters that might be part of the spatial model, the temporal model, or both.

Alternatively, you can set the parameter directly, e.g. model.spatial.verbose = True.

Note

If a parameter exists in both spatial and temporal models(e.g., verbose), both models will be updated.

Parameters: params (dict) – A dictionary of parameters to set.
class pulse2percept.models.ScoreboardSpatial(**params)[source]

Scoreboard model of [Beyeler2019] (spatial module only)

Implements the scoreboard model described in [Beyeler2019], where all percepts are Gaussian blobs.

Note

Use this class if you want to combine the spatial model with a temporal model. Use ScoreboardModel if you want a a standalone model.

Parameters: rho (double, optional) – Exponential decay constant describing phosphene size (microns). x_range ((x_min, x_max), optional) – A tuple indicating the range of x values to simulate (in degrees of visual angle). In a right eye, negative x values correspond to the temporal retina, and positive x values to the nasal retina. In a left eye, the opposite is true. y_range (tuple, (y_min, y_max)) – A tuple indicating the range of y values to simulate (in degrees of visual angle). Negative y values correspond to the superior retina, and positive y values to the inferior retina. xystep (int, double, tuple) – Step size for the range of (x,y) values to simulate (in degrees of visual angle). For example, to create a grid with x values [0, 0.5, 1] use x_range=(0, 1) and xystep=0.5. grid_type ({'rectangular', 'hexagonal'}) – Whether to simulate points on a rectangular or hexagonal grid important :: (.) – If you change important model parameters outside the constructor (e.g., by directly setting model.axlambda = 100), you will have to call model.build() again for your changes to take effect.
build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
static dva2ret(xdva)[source]

Convert degrees of visual angle (dva) into retinal coords (um)

find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Returns all settable parameters of the scoreboard model

is_built

A flag indicating whether the model has been built

plot(use_dva=False, autoscale=True, ax=None)[source]

Plot the model

Parameters: use_dva (bool, optional) – Uses degrees of visual angle (dva) if True, else retinal coordinates (microns) autoscale (bool, optional) – Whether to adjust the x,y limits of the plot to fit the implant ax (matplotlib.axes._subplots.AxesSubplot, optional) – A Matplotlib axes object. If None, will either use the current axes (if exists) or create a new Axes object. ax (matplotlib.axes.Axes) – Returns the axis object of the plot
predict_percept(implant, t_percept=None)[source]

Predict the spatial response

Important

Don’t override this method if you are creating your own model. Customize _predict_spatial instead.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
static ret2dva(xret)[source]

Convert retinal corods (um) to degrees of visual angle (dva)

set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.SpatialModel(**params)[source]

Abstract base class for all spatial models

Provides basic functionality for all spatial models:

• build: builds the spatial grid used to calculate the percept. You can add your own _build method (note the underscore) that performs additional expensive one-time calculations.
• predict_percept: predicts the percepts based on an implant/stimulus. You can add your own _predict_spatial method to customize this step. A user must call build before calling predict_percept.

To create your own spatial model, you must subclass SpatialModel and provide implementations for its three abstract methods:

• dva2ret: a means to convert from degrees of visual angle (dva) to retinal coordinates (microns).
• ret2dva: a means to convert from retinal coordinates to dva.
• _predict_spatial: a method that accepts an ElectrodeArray as well as a Stimulus and computes the brightness at all spatial coordinates of self.grid, returned as a 2D NumPy array (space x time).

In addition, you can customize the following:

• __init__: the constructor can be used to define additional parameters (note that you cannot add parameters on-the-fly)
• get_default_params: all settable model parameters must be listed by this method
• _build (optional): a way to add one-time computations to the build process

New in version 0.6.

Note

You will not be able to add more parameters outside the constructor; e.g., model.newparam = 1 will lead to a FreezeError.

build(**build_params)[source]

Build the model

Performs expensive one-time calculations, such as building the spatial grid used to predict a percept. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
dva2ret(xdva)[source]

Convert degrees of visual angle (dva) into retinal coords (um)

find_threshold(implant, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: implant (ProsthesisSystem) – The implant and its stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

is_built

A flag indicating whether the model has been built

plot(use_dva=False, autoscale=True, ax=None)[source]

Plot the model

Parameters: use_dva (bool, optional) – Uses degrees of visual angle (dva) if True, else retinal coordinates (microns) autoscale (bool, optional) – Whether to adjust the x,y limits of the plot to fit the implant ax (matplotlib.axes._subplots.AxesSubplot, optional) – A Matplotlib axes object. If None, will either use the current axes (if exists) or create a new Axes object. ax (matplotlib.axes.Axes) – Returns the axis object of the plot
predict_percept(implant, t_percept=None)[source]

Predict the spatial response

Important

Don’t override this method if you are creating your own model. Customize _predict_spatial instead.

Parameters: implant (ProsthesisSystem) – A valid prosthesis system. A stimulus can be passed via stim. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if implant.stim is None.
ret2dva(xret)[source]

Convert retinal corods (um) to degrees of visual angle (dva)

set_params(**params)[source]

Set the parameters of this model

class pulse2percept.models.TemporalModel(**params)[source]

Abstract base class for all temporal models

Provides basic functionality for all temporal models:

• build: builds the model in order to calculate the percept. You can add your own _build method (note the underscore) that performs additional expensive one-time calculations.
• predict_percept: predicts the percepts based on an implant/stimulus. You can add your own _predict_temporal method to customize this step. A user must call build before calling predict_percept.

To create your own temporal model, you must subclass SpatialModel and provide implementations for its three abstract methods:

• dva2ret: a means to convert from degrees of visual angle (dva) to retinal coordinates (microns).
• ret2dva: a means to convert from retinal coordinates to dva.
• _predict_temporal: a method that accepts either a Stimulus or a Percept object and a list of time points at which to calculate the resulting percept, returned as a 2D NumPy array (space x time).

In addition, you can customize the following:

• __init__: the constructor can be used to define additional parameters (note that you cannot add parameters on-the-fly)
• get_default_params: all settable model parameters must be listed by this method
• _build (optional): a way to add one-time computations to the build process

New in version 0.6.

Note

You will not be able to add more parameters outside the constructor; e.g., model.newparam = 1 will lead to a FreezeError.

build(**build_params)[source]

Build the model

Every model must have a build method, which is meant to perform all expensive one-time calculations. You must call build before calling predict_percept.

Important

Don’t override this method if you are building your own model. Customize _build instead.

Parameters: build_params (additional parameters to set) – You can overwrite parameters that are listed in get_default_params. Trying to add new class attributes outside of that will cause a FreezeError. Example: model.build(param1=val)
find_threshold(stim, bright_th, amp_range=(0, 999), amp_tol=1, bright_tol=0.1, max_iter=100, t_percept=None)[source]

Find the threshold current for a certain stimulus

Estimates amp_th such that the output of model.predict_percept(stim(amp_th)) is approximately bright_th.

Parameters: stim (Stimulus) – The stimulus to use. Stimulus amplitude will be up and down regulated until amp_th is found. bright_th (float) – Model output (brightness) that’s considered “at threshold”. amp_range ((amp_lo, amp_hi), optional) – Range of amplitudes to search (uA). amp_tol (float, optional) – Search will stop if candidate range of amplitudes is within amp_tol bright_tol (float, optional) – Search will stop if model brightness is within bright_tol of bright_th max_iter (int, optional) – Search will stop after max_iter iterations t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, implant.stim.time is used. amp_th (float) – Threshold current (uA), estimated so that the output of model.predict_percept(stim(amp_th)) is within bright_tol of bright_th.
get_default_params()[source]

Return a dictionary of default values for all model parameters

is_built

A flag indicating whether the model has been built

predict_percept(stim, t_percept=None)[source]

Predict the temporal response

Important

Don’t override this method if you are creating your own model. Customize _predict_temporal instead.

Parameters: stim (: py: class: ~pulse2percept.stimuli.Stimulus or) – : py: class: ~pulse2percept.models.Percept Either a Stimulus or a Percept object. The temporal model will be applied to each spatial location in the stimulus/percept. t_percept (float or list of floats, optional) – The time points at which to output a percept (ms). If None, the percept will be output once very 20 ms (50 Hz frame rate). Note If your stimulus is shorter than 20 ms, you should specify the desired time points manually. percept (Percept) – A Percept object whose data container has dimensions Y x X x T. Will return None if stim is None.

Notes

• If a list of time points is provided for t_percept, the values will automatically be sorted.
set_params(**params)[source]

Set the parameters of this model